XAG P100 Pro 60L Review: High-Capacity Agricultural Application Drone

What the XAG P100 Pro 60L is

The P100 Pro is a foldable multirotor agricultural application aircraft built for spraying and granular spreading. The 60L Standard (6B2C) configuration is a working package rather than a bare drone: it combines the P100 Pro airframe with the RevoSpray and RevoCast payload ecosystem, six Smart SuperCharge batteries and two chargers. That matters because daily productivity is dictated by battery rotation, loading and refill logistics as much as by the aircraft itself.

This is not a hobby drone and it should not be evaluated like one. It is a specialized application platform for crop-protection products, foliar nutrition, fertilizer, seed and other approved granular materials. Product choice, label compliance, drift control, operator qualification, local aviation rules and the farm's application records remain decisive parts of the job.

Capacity and application systems

XAG publishes a maximum payload of 50 kg for the P100 Pro platform. In liquid work, its RevoSpray 3 system is specified at up to 22 L/min, with a stated droplet-size range of 60–400 μm and a claimed application width of 5–10 m. Those figures make the aircraft relevant to broad-acre work when field geometry and refill access are favorable. They do not establish a universal hectare-per-hour rate: the real result changes with application volume, crop canopy, wind, nozzle and atomization settings, speed, turning losses and the distance to the supply point.

With the RevoCast 3 module, the platform moves into granular work. XAG lists up to 150 kg/min, with 1–6 mm granules and a referenced maximum flight speed of 13.8 m/s for spreading. It is a valuable second mission, but only after material flow, spread pattern, calibration and boundary behavior are proven with the exact product being applied. A stated feed rate is not the same thing as verified field uniformity.

Airframe, power and field workflow

The foldable quadcopter airframe is designed for transport between fields, while the bundled six-battery, two-charger arrangement is meant to reduce idle time during peak application windows. XAG positions the wider P100 Pro power system around rapid charging and water-cooling charging concepts. In practice, a fleet manager should plan for a safe electrical supply, protected charging location, trained battery handling, a realistic turnaround time and redundancy for the busiest day of the season.

The 6B2C package is more credible for commercial work than a minimal battery bundle because it recognizes the continuous-cycle nature of application. Still, the kit label alone is not enough for procurement. Confirm the exact battery model, charger output, regional power requirements, included payload modules, controller, batteries, warranty and post-sale support in writing before ordering.

Where it fits best

The P100 Pro makes the strongest case for farms and custom operators with recurring aerial application work, adequate loading infrastructure and a clear need to switch between liquid and granular tasks. It can help cover ground when field access is poor or the available treatment window is short. It is less persuasive for occasional small-acreage spraying, where preparation, compliance and maintenance can outweigh the time saved in the air.

Orchards and specialty crops deserve a separate assessment. Canopy density, row spacing, target deposition and drift risk change the operating parameters substantially compared with open field crops. Do not purchase on broad-acre headline figures if the planned use is canopy penetration or sensitive-field-edge work; request the current operating manual and application guidance for those conditions.

Limitations and procurement checks

High capacity increases the consequence of poor process control. Operators need a documented calibration procedure, weather limits, emergency plan, product-handling process and a local compliance path. Buyers should also confirm the availability of parts, field service, firmware support, training and insurance requirements in their country. The listed kit price captures only one part of ownership; support equipment, transport, loading, consumables, insurance and operator time belong in the business case.

Verdict

The XAG P100 Pro 60L Standard (6B2C) Kit is a capable professional agricultural application system with the right ingredients for high-utilization spraying and spreading: a 50 kg payload rating, 22 L/min maximum liquid flow, modular payloads and a battery/charger bundle designed around field cycles. Its 4.2/5 rating reflects that strong capability, tempered by the operational discipline it requires. It is a credible purchase for well-prepared agricultural operators, not a shortcut around application expertise, local rules or agronomic validation.